TFortis PSW-1-45-WiFi

Outdoor Switches

Showing all 11 results

  • TFortis PSW-1-45-WiFi

    TFortis PSW-1-45-WiFi – switch for networking IP-based outdoor video surveillance systems with the use of Wi-Fi. It has 4 ports 10/100Base-Tx with PoE and 1 port 10/100Base-Tx that supports Passive PoE 24V. Inside the switch, there is a place for the installation of Breakers on the DIN-rail.

    Support of Passive PoE 24V on the 5-th port allows connecting wireless access points, for example, Ubiquiti, without using external power adapters and PoE adapters.

    4 ports with PoE provide power supply to IP cameras.

    Automatic restart of IP cameras effectively deals with their hanging.

    Built-in Lightning Protection on ports and 220V power supply protects equipment from high-voltage surges.

    Place for breakers excludes usage of additional cabinets.

    Quick View
  • TFortis PSW-1G4F

    TFortis PSW-1G4F – managed switch with the ability to switch to unmanaged mode using a jumper. Designed for use in outdoor IP video surveillance networks. It has 4 ports 10/100Base-Tx PoE with RJ-45 connector, 1 port 1000Base-X with SFP connector, and “copper” port RJ-45 with speed autonegotiation (10/100/1000Base-T). It is made in a IP66 casing. Operation temperature is -55°C to + 65°C (-67°F to 149°F).

    4 ports with PoE provide power supply to IP cameras.

    Gigabit SFP port allows you to transfer video stream from IP-cameras over long distances, at a highspeed rate, without delays. You can select optical port speed (1000M or 100M) with the jumper.

    “Copper” Gigabit port with speed autonegotiation allows you to integrate the switch into any existing network including those, where gigabit speeds are not supported.

    Automatic restart of IP cameras effectively deals with their hanging.

    Built-in Lightning Protection on ports and 220 V power supply protects equipment from high-voltage surges.

    Power for camera and TFortis TH camera housing is supplied via single cable (“twisted pair”).

    Quick View
  • TFortis PSW-1G4F-UPS

    TFortis PSW-1G4F-UPS is a modification of the PSW-1G4F; it has similar functionality. It features a built-in uninterruptible power supply (UPS). UPS allows the backup power supply to both switch itself and the IP cameras connected to it.

    When the mains voltage deviates from the norm, an automatic changeover to backup battery is made.

    Deviations from the norm are following:

    • full disconnection from mains voltage;
    • the mains voltage is below or above the permissible threshold (phase unbalance);
    • 380V voltage is applied (zero loss).
    Quick View
  • TFortis PSW-2G+

    TFortis PSW-2G+ Switch has high operational reliability. Designed for use in outdoor IP surveillance networks where powerful PTZ dome cameras are used. It has 4 ports 10/100Base-Tx PoE+ with RJ-45 connector and 2 ports 1000Base-X with SFP connector. It is made in a hermetic casing IP66. Optical cross is included in the kit. Operation temperature is -55°C to +70°C (-67°F to 158°F).

    4 ports RJ-45 with PoE+ provide high-quality power supply to powerful IP cameras.

    2 ports are capable of delivering up to 60 watts per port so you can power PTZ Dome Cameras.

    Gigabit SFP ports allow you to transfer video stream from IP-cameras over long distances, with great speed, without delays.

    Built-in optical distribution frame excludes the use of additional external cabinets and makes it possible to cut the optical cable directly into the switch.

    The presence of DIN-rail allows installing protective devices directly into the body of the device.

    Automatic restart of IP cameras effectively deals with their hanging.

    Built-in Lightning Protection on ports and 220 V power supply protects equipment from high-voltage surges.

    Power for camera and TFortis TH housing is supplied via one cable (“twisted pair”).

    Quick View
  • TFortis PSW-2G2F+UPS

    TFortis PSW-2G2F+UPS Switch is designed for use in outdoor IP video surveillance networks where powerful IP-cameras (including PTZ-cameras) are used. It features a built-in uninterruptible power supply (UPS).

    Ports RJ-45 with PoE provide high-quality power supply to powerful IP cameras.

    Two Gigabit SFP ports allow you to transfer video stream from IP-cameras for long distances, at a high speed rate, without delays and to combine switches into “ring” and “ling” topologies.

    Built-in uninterruptible power supply allows the backup power supply to both the switch itself and IP cameras connected to it.

    Quick View
  • TFortis PSW-2G4F

    TFortis PSW-2G4F – managed switch with the ability to switch to unmanaged mode using a jumper. Designed for use in outdoor IP surveillance networks. It has 4 ports 10/100Base-Tx POE with RJ-45 connector, and 1 port 1000Base-X with SFP connector, and “copper” port RJ-45 with speed autonegotiation (10/100/1000Base-T). It is made in a hermetic casing IP66. Operation temperature is -55°C to + 65°C (-67°F to 149°F).

    4 ports with PoE provide quality power supply to IP cameras.

    Gigabit SFP port allows you to transfer video stream from IP-cameras over long distances, with great speed, without delays. You can select optical port speed (1000M or 100M) with the jumper.

    “Copper” Gigabit port with speed autonegotiation allows you to integrate the switch into any existing network including those, where gigabit speeds are not supported.

    Automatic restart of IP cameras effectively deal with their hanging.

    Built-in Lightning Protection on ports and 220 V power supply protects equipment from high-voltage surges.

    Power for camera and TFortis TH housing is supplied via one cable (“twisted pair”).

    Quick View
  • TFortis PSW-2G4F-Hot

    Operating under the sun
    Sunshields reflect sun rays from all sides of the device. The gap between sunshields and enclosure provides air movement and isolation from the sunshield surface.

    Quick View
  • TFortis PSW-2G4F-UPS

    TFortis PSW-2G4F-UPS Switch is a modification of the PSW-2G4F; it has similar functionality. It features a built-in uninterruptible power supply (UPS). UPS allows the backup power supply to both the switch itself and IP cameras connected to it.

    When the mains voltage deviates from the norm, an automatic changeover to backup battery is made.

    Deviations from the norm are following:

    • full disconnection from mains voltage;
    • the mains voltage is below or above the permissible threshold (phase unbalance);
    • 380V voltage is applied (zero loss).
    Quick View
  • TFortis PSW-2G6F+

    TFortis PSW-2G6F+ Switch has high operational reliability. Designed for use in outdoor IP surveillance networks where powerful PTZ dome cameras are used. It has 6 ports 10/100Base-Tx PoE+ with RJ-45 connector and 2 ports 1000Base-X with SFP connector. It is made in a hermetic casing IP66. Optical cross is included in the kit. Operation temperature is -55°C to + 70°C (-67°F to 158°F).

    6 ports RJ-45 with PoE+ provide high-quality power supply to powerful IP cameras.

    2 ports are capable of delivering up to 60 watts per port so you can power PTZ Dome Cameras.

    Gigabit SFP ports allow you to transfer video stream from IP-cameras for long distances with great speed without delays.

    Built-in optical distribution frame excludes the use of additional external cabinets and makes it possible to terminate the optical cable directly into the switch.

    The presence of DIN-rail allows installing circuit breakers directly into the body of the device.

    Automatic restart of IP cameras effectively deals with their hanging.

    Built-in Lightning Protection on ports and 220 V power supply protects equipment from high-voltage surges.

    Power for camera and TFortis TH housing is supplied via single cable (“twisted pair”).

    Quick View
  • TFortis PSW-2G8F+

    TFortis PSW-2G8F+ Switch has high operational reliability. Designed for use in outdoor IP surveillance networks where powerful PTZ dome cameras are used. It has 8 ports 10/100Base-Tx PoE+ with RJ-45 connector and 2 ports 1000Base-X with SFP connector. It is made in a waterproof casing IP66. Optical distribution frame is included. Operation temperature is -55°C to + 70°C (-67°F to 158°F).

    8 ports RJ-45 with PoE+ provide high quality power supply to powerful IP cameras.

    Gigabit SFP ports allow you to transfer video stream from IP-cameras for long distances with great speed without delays.

    Built-in optical distribution frame excludes the use of additional external cabinets and makes it possible to terminate the optical cable directly into

    The presence of DIN-rail allows installing circuit breakers directly into the body of the deivce.

    Automatic restart of IP cameras effectively deals with their hanging.

    Built-in Lightning Protection on ports and 220 V power supply protects equipment from high voltage surges.

    Power for camera and TFortis TH housing is supplied via single cable (“twisted pair”).

    Quick View
  • TFortis-PSW-11

    TFortis PSW-11 – unmanaged switch. It is designed for locating a single IP camera over a long distance. It has 1 port 10/100Base-Tx PoE with RJ-45 connector and 1 port SFP 100/1000Base-X. It is made in a hermetic casing IP66. Operating temperature is -55°C to + 50°C (-67°F to 122°F)

    Port with PoE provides quality power supply to IP cameras.

    The optical port of the switch is made in the form of a SFP slot. SFP-cages allows using different types of optical transceivers and transmitting traffic to long distances.

    Monitoring function for IP-camera hanging allows to deal effectively with their hanging.

    Built-in Lightning Protection on ports and 220 V power supply protects equipment from high-voltage surges.

    Power for camera and TFortis TH housing is supplied via one cable (“twisted pair”).

    Quick View
X